testimonials
Thank you for the outstanding service. I really appreciate it. We will continue to do business with you folks in the future. We'll have a basement to finish in the next y...

View Testimonials

Search

  • Solid Bamboo Flooring Test Data

    Click here for PDF of Solid Bamboo Flooring Test Data

    Bamboo Flooring Brief Introduction
    The bamboo flooring planks are machined with tongue and groove edges to provide interlocking assembly. Each piece is machine sanded on top, with a rough glue-ready surface on bottom. The edge above the tongue on the long edge is mitered and ready to accept standard flooring nails.

    Each pre-finished bamboo flooring board is coated with clear; UV cured acrylic polyurethane/aluminum oxide. only the finest machinery is used to apply and cure our durable coating.

    All our bamboo flooring is tongue and groove plank in 36" or 72" inches long by 3 7/8 inches wide by 5/8 inch thick, factory pre-finished with 7 coats of 100% solids UV cured Acrylic Urethane with aluminum oxide.


    ABRASION RESISTANCE
    Bamboo flooring tested according to ASTM C501 (H-22 Calibrated wheels loaded with
    1000 gram weight at 70 RPM for 1000 cycles) weight loss = .349 grams =.012 ounces. The test we have done for abrasion resistance showed that this flooring finish is one of the toughest to be found in the wood flooring industry.

    FLAMMABILITY
    Bamboo flooring tested according to ASTM E648 Critical Radiant
    Panel Test. Passes with a CLASS I rating per NFPA "Life Safety Code". (This flooring
    can be used in all classes of buildings.)

    SMOKE DENSITY
    Bamboo flooring tested according to ASTM E622 pass = 450 or less, passes with 269
    flaming mode and 329 non-flaming mode.

    CHEMICAL AND STAIN RESISTANCE
    Bamboo flooring tested with the following chemical reagents finish was unaffected:
    Acetic Acid (5%) Acetone Ammonium Hydroxide (10%) Toluene
    Detergent Solution Ethyl Alcohol (50%) Hydrochloric Acid
    (10%) Turpentine Heavy Duty (.025%) Hydrogen Peroxide (3%) Soap Solution (1%) Sodium
    Hydroxide (1%)

    INDENTATION RESISTANCE
    Bamboo flooring according to ASTM 1037 (Janka Ball Hardness) showed an average hardness of 1530. (27% harder than northern red oak and 14% harder than hard maple). Do the fact that bamboo is not a traditional hardwood that is grown over 20 or more years this rating can vary do the amount of rain , sun etc during its short 5 year season of growth.

    DIMENSIONAL STABILITY:
    Bamboo flooring according to standard method for wood flooring showed a
    dimensional change coefficient of .00144. (50% more stable than red oak)

    SLIP RESISTANCE:
    Bamboo flooring according to ASTM D2047 = results 0.71 coefficient of
    Friction. Static co-efficient of 590 exceeds the OSHA recommendation for level surfaces in the workplace.

    COMPRESSIVE STRENGTH:
    Bamboo flooring according to ASTM D3501-86 A = results A) Parallel to Grain
    = 7,549 PSI B) Perpendicular to Grain =2,566 PSI C) Flat wise = 16,925
    PSI at 50% Strain. (Load to compress to 1/2 thickness)

    BENDING STRENGTH
    Bamboo flooring tested according to ASTM D3043-87 result = 13,608 PSI

    BENDING ELASTICITY MODULUS
    943,443 PSI

    SHEAR STRENGTH
    Bamboo flooring tested according to BRITISH STANDARD # 373 result = Parallel to
    Grain 1365 PSI

    TENSILE STRENGTH
    Bamboo flooring tested according to ASTM D3500-90 A result = Parallel to Grain
    15,290 PSI
     

    Actions